OtheHill It is the only drive on the cable. After all that you said concerning floppy dives and their cables and connections, and the LED, I also suspect now that the board on my floppy drive is fried, except if the power cable is faulty. When u turn on the system do u hear fans spinning or beeps? Our biggest problem is probably that those who start a subject usually don’t provide enough information or feedback to our responses, I suspect often because they’re just too lazy to do so. I need to study this topic some more. If the 40gb drive is a different brand, or if you get another hard drive and it’s a different brand, you can use a similar “crippled” program available from the drive manufacturer’s web site to copy an entire drive’s data to another drive. The problem was that I used the wrong version of diagnostic utility:
|Date Added:||27 June 2011|
|File Size:||44.33 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
I am so grateful that there is an expert in this rushed world who takes time to help a beginner like me, and to read all the time consuming details in my posts, and then respond with detailed, helpful answers and information that make things so much easier for 67144 to understand and do.
It has given me confidence and opened a new exiting world for me! I haven’t taken it out to look at it, but my System Tools told me the following about it: I read the name Phoenix Bios D, checked the beep codes at the link http: There are never any zeros or ones or lower case Ls or capital i’s in the Product Key. Almost all mboards made in or later have ATX “family” mboards.
MSI MS-6714 Manuals
Net cannot verify the validity of the statements made on this site. Then I put it back, turned power on, and no beep s. I listened very xudio and there was no sound from the floppy drive. Please enter a valid email address. They don’t need to install anything to the hard drive but they may use space on the drive for a swap file if there is insufficient RAM available.
Lately during the filling cycle water hammer is occurring. Thank you for all your help so far.
In this case the G would indicate integrated graphics. I found the following at http: I shall have to go check again. Posted on Jan 02, There are a few conventional SATA III hard drives, but mx have the same old lower max continuous data transfer rate, and they are still relatively expensive. If that is okay, then, yes, the 6.
That’s for an XP Repair installation, but the procedure is the ahdio except you need to delete and make at sudio one partition, and you will not have the second Repair choice, and that’s for XP Pro but what you see in XP Home’s Setup is nearly identical.
Try another data cable if in doubt. You can edit your question or post anyway.
MS | Hp MS GV Socket Motherboard
Click “Add” to insert your video. If someone has set the drive to a audoi mode, then that’s the only thing the bios can detect, unless the drive is re-set to it’s “native” mode or similar. When u turn on the system do u hear fans spinning or beeps? Do you see a place to connect it? It’s worth a thousand words. Tubesandwires The capacitors appeared clean and I saw no bulging and disfigurement. That isn’t a hard drive diagnostics program – it’s a hard drive preparation and data copying program – and you may not be able to use it on the Western Digital drive in any case.
That’s probably shown in the bios Setup, and possibly on the first screen when you boot the computer. Use good lighting to examine the ram slots if the contacts on the module appear to look fine – if you see damaged or missing they were vaporized contacts, and possibly black carbon deposits ns places where the plastic in the slot was melted, that ram slot can never be used again.
It is the only hard drive connected.
I’m still using a computer I built at the beginning of for Win 98SE that supports only SDram, and up to mb can be installed in it’s three ram slots, but the cost of three new 16 chip mb modules they must have 16 chipsor even used ones I’ve priced out so far, prohibits it being worth installing the maximum ram. I fiddled with my floppy drive in my MS and cleaned off adio heads. If when you compare the position of floppy disk when it is first inserted to when you eject itif you find that it has not moved much if at all, then the motor inside the drive has not spun the disk at all.