If your did like mine and went ahead automatically and installed the stinkin Jungo USB drivers anyway, then you’ll need to do the follow: WinDriver product line supports? How to replace the Jungo USB drivers: Navigate to your Windows Directory 2. It can be found at www. You’ll need to make some minor adjustments for the non-pico version.

Uploader: Aragal
Date Added: 10 November 2005
File Size: 67.59 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 61380
Price: Free* [*Free Regsitration Required]

I tried the AVR fuse bit calculator http: For the arduino the following changes are needed: I found many threads with tips on doing this and that, but none had all the missing pieces nor helped walk a newcomer through all the little adjustments that had to be made in order to make this happen at least for mkii newbie like avriisp.

I know this is ancient thread, but i had to register just to thank you for this post. Immediate Hardware Access and Debugging: I borowed avr isp mk2, followed your instructions, burned new bootloader and now it works.

Jungo Connectivity | WinDriver Driver Development Toolkit

Allow utilizing the additional bandwidth provided by bit hardware and enable bit data transfer on x86 platforms running bit operating systems. The same driver will run under all supported operating systems without any code modifications. Note this microprocessor runs at 10MHz not 8MHz as listed in the above fuse bit calculator.


Now since two pinholes line up with the ribbon stripe, look carefully for a triangle symbol. If you’re hooking up the MKii to your breadboard, be sure you have the cable’s pinouts correctly.

Jungo also can prepare the WHQL submission package for you. Velocity’s post is the closest on the web to do this, but I need more instruction particularly in step 5.

How to configure the Atmel AVRISP MKii to work with Arduino IDE

Field-tested on thousands of HW and OS configurations. From reading the user guide Quote.

Test your hardware through a graphical user-mode application, without having to write a single line of code. Silicon partners libraries to jump-start your driver development.

This helped me to recover my arduino mega from forever upload loop that many people experience. No OS internals or kernel knowledge required.

JUNGO – Atmel Corp. – AVRISP mkII Drivers Download

You’ll need to make some minor adjustments for the non-pico version. WinDriver product line supports?


Read more about our Partners. I also wanted to add. NET code into your existing. Hello all, since I’ve been helped by so many knowledgeable mjii generous people here, I wanted to give back a little on what I’ve learned. This site uses cookies: How to replace the Jungo USB drivers: Read our customer success stories.

WinDriver products are accompanied mkil highly detailed technical references that are designed to assist you in various stages of the development process.

Please provide more instruction on how to get over this fuse bit hurdle. It’s easy to get it working The triangle will point you to PIN 1, and thereafter you can make out the orientation of all the other juhgo. Go to “System32” 3. If anyone spots an error, please let me know. Friendly DriverWizard allows hardware diagnostics without writing a single line of code.

Multiple OS support and cross platform: Open up the programmers.